VMs experiment

This page is an auto-generated pretty printing of the results of running the experiments that form part of the paper The Impact of Meta-Tracing on VM Design and Implementation by Carl Friedrich Bolz and Laurence Tratt. The dmesg for the machine used to produce these results can be seen below.

Experimental results

The results here come from a results file last modified at 2013-01-06 14:08:15 GMT.

Binary TreesDhrystoneFannkuch Redux
14195000050000001011
C0.189±0.0087.986±0.0530.004±0.0020.179±0.0100.163±0.0061.992±0.010
HotSpot0.155±0.0142.423±0.0430.107±0.0060.240±0.0100.350±0.0083.448±0.029
Converge1--2.053±0.029207.274±3.048--
Converge2--0.118±0.0041.914±0.0222.658±0.04133.484±0.517
Lua2.240±0.071116.810±3.6610.201±0.00819.417±0.4747.683±0.321100.536±2.475
LuaJIT0.428±0.01023.185±0.0530.014±0.0060.879±0.0160.339±0.0084.180±0.010
CPython4.299±0.029211.453±1.1170.368±0.01035.072±0.5379.167±0.237114.001±2.189
Jython4.173±0.063102.303±1.2411.820±0.02928.432±0.4667.776±0.41976.069±4.753
PyPy--nonopt0.962±0.01033.858±0.1350.127±0.0065.898±0.0711.402±0.02216.989±0.220
PyPy0.631±0.00817.851±0.0880.069±0.0081.085±0.0141.256±0.02415.239±0.223
Ruby1.244±0.02059.834±0.9900.312±0.00829.819±0.25713.152±0.200172.098±2.168
JRuby1.714±0.05327.971±1.2232.050±0.03910.576±0.3046.313±0.12761.934±1.513
 
FastaKNucleotideMandelbrot
5000000500000001000000100000005005000
C0.285±0.0082.809±0.0390.413±0.0123.681±0.0370.028±0.0062.336±0.008
HotSpot0.647±0.0125.771±0.0710.541±0.0433.303±0.1900.106±0.0102.225±0.012
Converge1------
Converge2------
Lua6.031±0.16960.202±1.0805.469±0.06953.634±1.4390.536±0.00653.145±0.084
LuaJIT1.373±0.01613.631±0.0181.031±0.0248.977±0.0940.031±0.0082.404±0.016
CPython7.287±0.20671.737±0.8046.334±0.06363.405±0.5351.321±0.261134.419±32.347
Jython18.771±0.392170.831±8.9679.443±0.22181.955±1.5484.734±0.031354.069±2.885
PyPy--nonopt1.776±0.05516.744±0.5064.180±0.04140.879±0.2630.243±0.00619.767±0.245
PyPy1.524±0.07314.149±0.2704.173±0.03740.863±0.3250.176±0.00613.295±0.029
Ruby14.779±0.153147.719±2.27414.759±0.378145.703±2.0382.564±0.037255.330±2.926
JRuby40.169±1.911388.961±27.24310.158±0.21283.895±2.2791.812±0.02945.741±1.394
 
NBodyRegexDNARevComp
250000025000000100000010000000100000010000000
C0.402±0.0083.983±0.0372.593±0.03125.899±0.3980.030±0.0040.252±0.010
HotSpot0.472±0.0123.949±0.0222.881±0.41024.922±0.1550.141±0.0080.674±0.012
Converge1------
Converge2------
Lua14.398±0.439143.890±3.6534.959±0.02749.034±0.2670.540±0.0105.273±0.104
LuaJIT0.652±0.0186.461±0.1374.867±0.01253.849±0.1100.188±0.0061.766±0.020
CPython36.003±0.917359.641±7.5562.672±0.04326.484±0.1160.124±0.0061.061±0.014
Jython42.530±2.522413.519±3.84713.022±0.314118.544±2.8671.808±0.0887.029±0.290
PyPy--nonopt3.675±0.05136.296±0.4001.262±0.01411.348±0.0980.254±0.0142.338±0.069
PyPy3.662±0.09236.285±1.0151.269±0.02211.482±0.1880.250±0.0102.305±0.065
Ruby43.046±0.498431.491±5.5237.644±0.07676.401±0.9800.192±0.0101.770±0.055
JRuby13.056±1.254114.922±1.33310.072±0.68887.696±7.7791.944±0.0334.974±0.194
 
RichardsSpectral Norm
101005005000
C0.012±0.0060.079±0.0060.011±0.0061.908±0.024
HotSpot0.109±0.0100.169±0.0140.171±0.0377.210±0.010
Converge19.931±0.102100.216±1.356--
Converge20.637±0.0062.850±0.014--
Lua0.665±0.0246.574±0.1391.488±0.020147.840±2.297
LuaJIT0.085±0.0060.763±0.0100.067±0.0086.096±0.010
CPython1.585±0.02215.698±0.2274.766±0.073490.081±2.693
Jython2.820±0.06913.870±0.3454.333±0.100291.221±39.409
PyPy--nonopt0.515±0.0102.839±0.0160.100±0.0066.137±0.020
PyPy0.267±0.0060.544±0.0080.099±0.0066.134±0.010
Ruby0.793±0.0187.159±0.0612.897±0.029285.637±2.234
JRuby2.130±0.0253.640±0.0533.275±0.041158.899±2.914

dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.5.0-17-generic ([email protected]) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bc858fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bc859000-0x00000000bc8a7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bc8a8000-0x00000000bc8b0fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bc8b1000-0x00000000bcbc1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bcbc2000-0x00000000bcbc2fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bcbc3000-0x00000000bcbd2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bcbd3000-0x00000000bcbf0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcbf1000-0x00000000bcc14fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bcc15000-0x00000000bcc57fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcc58000-0x00000000bce77fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bce78000-0x00000000bcffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd800000-0x00000000bf9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023e5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Viglen DQ67SW/DQ67SW, BIOS SWQ6710H.86A.0065.2012.0917.1519 09/17/2012
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x23e600 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FC0000000 write-back
[    0.000000]   2 base 0BD800000 mask FFF800000 uncachable
[    0.000000]   3 base 0BE000000 mask FFE000000 uncachable
[    0.000000]   4 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   5 base 23E600000 mask FFFE00000 uncachable
[    0.000000]   6 base 23E800000 mask FFF800000 uncachable
[    0.000000]   7 base 23F000000 mask FFF000000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 8GB, type WB
[    0.000000] reg 1, base: 8GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3032MB, range: 8MB, type UC
[    0.000000] reg 3, base: 3040MB, range: 32MB, type UC
[    0.000000] reg 4, base: 3GB, range: 1GB, type UC
[    0.000000] reg 5, base: 9190MB, range: 2MB, type UC
[    0.000000] reg 6, base: 9192MB, range: 8MB, type UC
[    0.000000] reg 7, base: 9200MB, range: 16MB, type UC
[    0.000000] total RAM covered: 8126M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 9  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3032MB, range: 8MB, type UC
[    0.000000] reg 3, base: 3040MB, range: 32MB, type UC
[    0.000000] reg 4, base: 4GB, range: 4GB, type WB
[    0.000000] reg 5, base: 8GB, range: 1GB, type WB
[    0.000000] reg 6, base: 9190MB, range: 2MB, type UC
[    0.000000] reg 7, base: 9192MB, range: 8MB, type UC
[    0.000000] reg 8, base: 9200MB, range: 16MB, type UC
[    0.000000] e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
[    0.000000] found SMP MP-table at [mem 0x000fda00-0x000fda0f] mapped at [c00fda00]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[    0.000000] Base memory trampoline at [c0096000] 96000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x379fffff] page 2M
[    0.000000]  [mem 0x37a00000-0x37bfdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[    0.000000] RAMDISK: [mem 0x36332000-0x37190fff]
[    0.000000] ACPI: RSDP 000f0450 00024 (v02  INTEL)
[    0.000000] ACPI: XSDT bc8a8078 0006C (v01 Viglen Computer 01072009 AMI  00010013)
[    0.000000] ACPI: FACP bc8afb98 000F4 (v04 INTEL  DQ67SW   01072009 AMI  00010013)
[    0.000000] ACPI: DSDT bc8a8170 07A26 (v02 INTEL  DQ67SW   00000016 INTL 20051117)
[    0.000000] ACPI: FACS bcbd7f80 00040
[    0.000000] ACPI: APIC bc8afc90 00092 (v03 INTEL  DQ67SW   01072009 AMI  00010013)
[    0.000000] ACPI: TCPA bc8afd28 00032 (v02 INTEL  DQ67SW   00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT bc8afd60 001D6 (v01 INTEL  DQ67SW   00000001 MSFT 03000001)
[    0.000000] ACPI: MCFG bc8aff38 0003C (v01 INTEL  DQ67SW   01072009 MSFT 00000097)
[    0.000000] ACPI: HPET bc8aff78 00038 (v01 INTEL  DQ67SW   01072009 AMI. 00000004)
[    0.000000] ACPI: ASF! bc8affb0 000A0 (v32 INTEL  DQ67SW   00000001 TFSM 000F4240)
[    0.000000] ACPI: SLIC bc8b0050 00176 (v01 Viglen Computer 01072009 AMI  00010013)
[    0.000000] ACPI: DMAR bc8b01c8 000E8 (v01 INTEL  DQ67SW   00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 8298MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x37bfdfff]
[    0.000000]   HighMem  [mem 0x37bfe000-0x3e5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x00099fff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
[    0.000000]   node   0: [mem 0x40200000-0xbc858fff]
[    0.000000]   node   0: [mem 0xbcbc2000-0xbcbc2fff]
[    0.000000]   node   0: [mem 0xbce78000-0xbcffffff]
[    0.000000]   node   0: [mem 0x00000000-0x3e5fffff]
[    0.000000] On node 0 totalpages: 2075500
[    0.000000] free_area_init_node: node 0, pgdat c18a0840, node_mem_map f1b62200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3946 pages, LIFO batch:0
[    0.000000]   Normal zone: 1752 pages used for memmap
[    0.000000]   Normal zone: 221990 pages, LIFO batch:31
[    0.000000]   HighMem zone: 16597 pages used for memmap
[    0.000000]   HighMem zone: 1831183 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[    0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] e820: [mem 0xbfa00000-0xfed1bfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f7b7a000 s34176 r0 d23168 u57344
[    0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2057119
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=d6cf21f4-efd5-49fd-b66b-73781f6c7f71 ro text
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] allocated 18820992 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00037bfe:0023e600)
[    0.000000] Memory: 8183432k/9410560k available (5956k kernel code, 118568k reserved, 2928k data, 756k init, 7391120k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
[    0.000000]       .init : 0xc18ae000 - 0xc196b000   ( 756 kB)
[    0.000000]       .data : 0xc15d1358 - 0xc18ad6c0   (2928 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15d1358   (5956 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:744 16
[    0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2793.686 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.37 BogoMIPS (lpj=11174744)
[    0.000012] pid_max: default: 32768 minimum: 301
[    0.000048] Security Framework initialized
[    0.000067] AppArmor: AppArmor initialized
[    0.000071] Yama: becoming mindful.
[    0.000129] Mount-cache hash table entries: 512
[    0.000382] Initializing cgroup subsys cpuacct
[    0.000387] Initializing cgroup subsys memory
[    0.000399] Initializing cgroup subsys devices
[    0.000403] Initializing cgroup subsys freezer
[    0.000408] Initializing cgroup subsys blkio
[    0.000412] Initializing cgroup subsys perf_event
[    0.000451] CPU: Physical Processor ID: 0
[    0.000455] CPU: Processor Core ID: 0
[    0.000462] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.000462] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.000472] mce: CPU supports 9 MCE banks
[    0.000492] CPU0: Thermal monitoring enabled (TM1)
[    0.000504] using mwait in idle threads.
[    0.003632] ACPI: Core revision 20120320
[    0.013203] ftrace: allocating 24585 entries in 49 pages
[    0.030432] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.030908] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.070538] CPU0: Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz stepping 07
[    0.174870] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[    0.174882] PEBS disabled due to CPU errata.
[    0.174886] ... version:                3
[    0.174890] ... bit width:              48
[    0.174893] ... generic registers:      4
[    0.174897] ... value mask:             0000ffffffffffff
[    0.174901] ... max period:             000000007fffffff
[    0.174905] ... fixed-purpose events:   3
[    0.174908] ... event mask:             000000070000000f
[    0.175102] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.175210] CPU 1 irqstacks, hard=f7554000 soft=f7556000
[    0.185931] Initializing CPU#1
[    0.175212] Booting Node   0, Processors  #1
[    0.188435] CPU 2 irqstacks, hard=f7570000 soft=f7572000
[    0.198984] Initializing CPU#2
[    0.188443]  #2
[    0.201648] CPU 3 irqstacks, hard=f757c000 soft=f757e000
[    0.212196] Initializing CPU#3
[    0.201655]  #3
[    0.214873] CPU 4 irqstacks, hard=f75b4000 soft=f75b6000
[    0.225574] Initializing CPU#4
[    0.214880]  #4
[    0.228101] CPU 5 irqstacks, hard=f75d0000 soft=f75d2000
[    0.238649] Initializing CPU#5
[    0.228109]  #5
[    0.241319] CPU 6 irqstacks, hard=f75dc000 soft=f75de000
[    0.251867] Initializing CPU#6
[    0.241327]  #6
[    0.254538] CPU 7 irqstacks, hard=f75f0000 soft=f75f2000
[    0.254546]  #7 Ok.
[    0.265087] Initializing CPU#7
[    0.267712] Brought up 8 CPUs
[    0.267721] Total of 8 processors activated (44698.97 BogoMIPS).
[    0.281017] devtmpfs: initialized
[    0.281235] EVM: security.selinux
[    0.281239] EVM: security.SMACK64
[    0.281242] EVM: security.capability
[    0.281318] PM: Registering ACPI NVS region [mem 0xbc859000-0xbc8a7fff] (323584 bytes)
[    0.281333] PM: Registering ACPI NVS region [mem 0xbcbd3000-0xbcbf0fff] (122880 bytes)
[    0.281342] PM: Registering ACPI NVS region [mem 0xbcc15000-0xbcc57fff] (274432 bytes)
[    0.282493] dummy: 
[    0.282538] RTC time: 22:19:47, date: 12/10/12
[    0.282591] NET: Registered protocol family 16
[    0.282709] Trying to unpack rootfs image as initramfs...
[    0.282751] EISA bus registered
[    0.282841] ACPI: bus type pci registered
[    0.282916] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.282924] PCI: not using MMCONFIG
[    0.293869] PCI: Using configuration type 1 for base access
[    0.295195] bio: create slab  at 0
[    0.295300] ACPI: Added _OSI(Module Device)
[    0.295305] ACPI: Added _OSI(Processor Device)
[    0.295309] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.295314] ACPI: Added _OSI(Processor Aggregator Device)
[    0.297011] ACPI: EC: Look up EC in DSDT
[    0.298973] ACPI: Executed 1 blocks of module-level executable AML code
[    0.303271] ACPI: SSDT bcbdf898 006F4 (v01    AMI      IST 00000001 MSFT 03000001)
[    0.303869] ACPI: Dynamic OEM Table Load:
[    0.303875] ACPI: SSDT   (null) 006F4 (v01    AMI      IST 00000001 MSFT 03000001)
[    0.303923] ACPI: SSDT bcbd6d98 000E4 (v01    AMI      CST 00000001 MSFT 03000001)
[    0.304375] ACPI: Dynamic OEM Table Load:
[    0.304380] ACPI: SSDT   (null) 000E4 (v01    AMI      CST 00000001 MSFT 03000001)
[    0.305642] ACPI: Interpreter enabled
[    0.305655] ACPI: (supports S0 S3 S4 S5)
[    0.305681] ACPI: Using IOAPIC for interrupt routing
[    0.305709] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.305792] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[    0.305799] PCI: Using MMCONFIG for extended config space
[    0.306206] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.312363] ACPI: No dock devices found.
[    0.312374] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.312687] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.312961] pci_root PNP0A08:00: >host bridge window [io  0x0000-0x03af]
[    0.312967] pci_root PNP0A08:00: >host bridge window [io  0x03e0-0x0cf7]
[    0.312973] pci_root PNP0A08:00: >host bridge window [io  0x03b0-0x03df]
[    0.312979] pci_root PNP0A08:00: >host bridge window [io  0x0d00-0xffff]
[    0.312985] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
[    0.312992] pci_root PNP0A08:00: >host bridge window [mem 0x000c0000-0x000dffff]
[    0.312999] pci_root PNP0A08:00: >host bridge window [mem 0xbfa00000-0xffffffff]
[    0.313042] PCI host bridge to bus 0000:00
[    0.313048] pci_bus 0000:00: >root bus resource [io  0x0000-0x03af]
[    0.313054] pci_bus 0000:00: >root bus resource [io  0x03e0-0x0cf7]
[    0.313059] pci_bus 0000:00: >root bus resource [io  0x03b0-0x03df]
[    0.313064] pci_bus 0000:00: >root bus resource [io  0x0d00-0xffff]
[    0.313070] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
[    0.313076] pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff]
[    0.313082] pci_bus 0000:00: >root bus resource [mem 0xbfa00000-0xffffffff]
[    0.313096] pci 0000:00:00.0: >[8086:0100] type 00 class 0x060000
[    0.313150] pci 0000:00:01.0: >[8086:0101] type 01 class 0x060400
[    0.313199] pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
[    0.313232] pci 0000:00:02.0: >[8086:0102] type 00 class 0x030000
[    0.313248] pci 0000:00:02.0: >reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[    0.313257] pci 0000:00:02.0: >reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.313265] pci 0000:00:02.0: >reg 20: [io  0xf000-0xf03f]
[    0.313356] pci 0000:00:16.0: >[8086:1c3a] type 00 class 0x078000
[    0.313395] pci 0000:00:16.0: >reg 10: [mem 0xfe62a000-0xfe62a00f 64bit]
[    0.313525] pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
[    0.313564] pci 0000:00:16.2: >[8086:1c3c] type 00 class 0x010185
[    0.313595] pci 0000:00:16.2: >reg 10: [io  0xf130-0xf137]
[    0.313611] pci 0000:00:16.2: >reg 14: [io  0xf120-0xf123]
[    0.313627] pci 0000:00:16.2: >reg 18: [io  0xf110-0xf117]
[    0.313642] pci 0000:00:16.2: >reg 1c: [io  0xf100-0xf103]
[    0.313658] pci 0000:00:16.2: >reg 20: [io  0xf0f0-0xf0ff]
[    0.313777] pci 0000:00:16.3: >[8086:1c3d] type 00 class 0x070002
[    0.313808] pci 0000:00:16.3: >reg 10: [io  0xf0e0-0xf0e7]
[    0.313824] pci 0000:00:16.3: >reg 14: [mem 0xfe629000-0xfe629fff]
[    0.313997] pci 0000:00:19.0: >[8086:1502] type 00 class 0x020000
[    0.314031] pci 0000:00:19.0: >reg 10: [mem 0xfe600000-0xfe61ffff]
[    0.314047] pci 0000:00:19.0: >reg 14: [mem 0xfe628000-0xfe628fff]
[    0.314062] pci 0000:00:19.0: >reg 18: [io  0xf080-0xf09f]
[    0.314186] pci 0000:00:19.0: >PME# supported from D0 D3hot D3cold
[    0.314230] pci 0000:00:1a.0: >[8086:1c2d] type 00 class 0x0c0320
[    0.314266] pci 0000:00:1a.0: >reg 10: [mem 0xfe627000-0xfe6273ff]
[    0.314421] pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
[    0.314467] pci 0000:00:1b.0: >[8086:1c20] type 00 class 0x040300
[    0.314497] pci 0000:00:1b.0: >reg 10: [mem 0xfe620000-0xfe623fff 64bit]
[    0.314633] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
[    0.314681] pci 0000:00:1c.0: >[8086:1c10] type 01 class 0x060400
[    0.314829] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
[    0.314884] pci 0000:00:1c.6: >[8086:1c1c] type 01 class 0x060400
[    0.315030] pci 0000:00:1c.6: >PME# supported from D0 D3hot D3cold
[    0.315084] pci 0000:00:1d.0: >[8086:1c26] type 00 class 0x0c0320
[    0.315119] pci 0000:00:1d.0: >reg 10: [mem 0xfe626000-0xfe6263ff]
[    0.315275] pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
[    0.315311] pci 0000:00:1e.0: >[8086:244e] type 01 class 0x060401
[    0.315434] pci 0000:00:1f.0: >[8086:1c4e] type 00 class 0x060100
[    0.315633] pci 0000:00:1f.2: >[8086:1c02] type 00 class 0x010601
[    0.315671] pci 0000:00:1f.2: >reg 10: [io  0xf0d0-0xf0d7]
[    0.315686] pci 0000:00:1f.2: >reg 14: [io  0xf0c0-0xf0c3]
[    0.315702] pci 0000:00:1f.2: >reg 18: [io  0xf0b0-0xf0b7]
[    0.315718] pci 0000:00:1f.2: >reg 1c: [io  0xf0a0-0xf0a3]
[    0.315734] pci 0000:00:1f.2: >reg 20: [io  0xf060-0xf07f]
[    0.315750] pci 0000:00:1f.2: >reg 24: [mem 0xfe625000-0xfe6257ff]
[    0.315848] pci 0000:00:1f.2: >PME# supported from D3hot
[    0.315884] pci 0000:00:1f.3: >[8086:1c22] type 00 class 0x0c0500
[    0.315913] pci 0000:00:1f.3: >reg 10: [mem 0xfe624000-0xfe6240ff 64bit]
[    0.315955] pci 0000:00:1f.3: >reg 20: [io  0xf040-0xf05f]
[    0.316039] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[    0.316128] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
[    0.316261] pci 0000:03:00.0: >[1033:0194] type 00 class 0x0c0330
[    0.316299] pci 0000:03:00.0: >reg 10: [mem 0xfe500000-0xfe501fff 64bit]
[    0.316490] pci 0000:03:00.0: >PME# supported from D0 D3hot D3cold
[    0.316573] pci 0000:00:1c.6: >PCI bridge to [bus 03-03]
[    0.316585] pci 0000:00:1c.6: >  bridge window [mem 0xfe500000-0xfe5fffff]
[    0.316655] pci 0000:04:03.0: >[11c1:5811] type 00 class 0x0c0010
[    0.316683] pci 0000:04:03.0: >reg 10: [mem 0xfe400000-0xfe400fff]
[    0.316808] pci 0000:04:03.0: >supports D1 D2
[    0.316811] pci 0000:04:03.0: >PME# supported from D0 D1 D2 D3hot
[    0.316880] pci 0000:00:1e.0: >PCI bridge to [bus 04-04] (subtractive decode)
[    0.316893] pci 0000:00:1e.0: >  bridge window [mem 0xfe400000-0xfe4fffff]
[    0.316904] pci 0000:00:1e.0: >  bridge window [io  0x0000-0x03af] (subtractive decode)
[    0.316907] pci 0000:00:1e.0: >  bridge window [io  0x03e0-0x0cf7] (subtractive decode)
[    0.316909] pci 0000:00:1e.0: >  bridge window [io  0x03b0-0x03df] (subtractive decode)
[    0.316912] pci 0000:00:1e.0: >  bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.316915] pci 0000:00:1e.0: >  bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.316917] pci 0000:00:1e.0: >  bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.316920] pci 0000:00:1e.0: >  bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
[    0.316951] pci_bus 0000:00: >on NUMA node 0
[    0.316954] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.317103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.317155] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[    0.317202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.317249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[    0.317393]  pci0000:00: >Requesting ACPI _OSC control (0x1d)
[    0.317572]  pci0000:00: >ACPI _OSC control (0x1d) granted
[    0.323594] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.323658] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.323718] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.323778] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.323837] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.323898] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[    0.323959] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.324018] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.324134] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.324149] vgaarb: loaded
[    0.324152] vgaarb: bridge control possible 0000:00:02.0
[    0.324373] SCSI subsystem initialized
[    0.324419] libata version 3.00 loaded.
[    0.324441] ACPI: bus type usb registered
[    0.324470] usbcore: registered new interface driver usbfs
[    0.324483] usbcore: registered new interface driver hub
[    0.324507] usbcore: registered new device driver usb
[    0.324598] PCI: Using ACPI for IRQ routing
[    0.327936] PCI: pci_cache_line_size set to 64 bytes
[    0.328035] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
[    0.328037] e820: reserve RAM buffer [mem 0xbc859000-0xbfffffff]
[    0.328044] e820: reserve RAM buffer [mem 0xbcbc3000-0xbfffffff]
[    0.328048] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
[    0.328051] e820: reserve RAM buffer [mem 0x23e600000-0x23fffffff]
[    0.328158] NetLabel: Initializing
[    0.328163] NetLabel:  domain hash size = 128
[    0.328166] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.328179] NetLabel:  unlabeled traffic allowed by default
[    0.328277] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.328290] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.331315] Switching to clocksource hpet
[    0.340293] AppArmor: AppArmor Filesystem Enabled
[    0.340322] pnp: PnP ACPI init
[    0.340342] ACPI: bus type pnp registered
[    0.340534] pnp 00:00: >[bus 00-ff]
[    0.340538] pnp 00:00: >[io  0x0cf8-0x0cff]
[    0.340541] pnp 00:00: >[io  0x0000-0x03af window]
[    0.340544] pnp 00:00: >[io  0x03e0-0x0cf7 window]
[    0.340546] pnp 00:00: >[io  0x03b0-0x03df window]
[    0.340549] pnp 00:00: >[io  0x0d00-0xffff window]
[    0.340552] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[    0.340555] pnp 00:00: >[mem 0x000c0000-0x000dffff window]
[    0.340558] pnp 00:00: >[mem 0xbfa00000-0xffffffff window]
[    0.340560] pnp 00:00: >[mem 0x00000000 window]
[    0.340619] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.340691] pnp 00:01: >[mem 0xfed10000-0xfed19fff]
[    0.340694] pnp 00:01: >[mem 0xe0000000-0xe3ffffff]
[    0.340696] pnp 00:01: >[mem 0xfed90000-0xfed93fff]
[    0.340699] pnp 00:01: >[mem 0xfed20000-0xfed3ffff]
[    0.340701] pnp 00:01: >[mem 0xfee00000-0xfee0ffff]
[    0.340750] system 00:01: >[mem 0xfed10000-0xfed19fff] has been reserved
[    0.340757] system 00:01: >[mem 0xe0000000-0xe3ffffff] has been reserved
[    0.340763] system 00:01: >[mem 0xfed90000-0xfed93fff] has been reserved
[    0.340770] system 00:01: >[mem 0xfed20000-0xfed3ffff] has been reserved
[    0.340776] system 00:01: >[mem 0xfee00000-0xfee0ffff] has been reserved
[    0.340783] system 00:01: >Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.340919] pnp 00:02: >[io  0x0000-0xffffffffffffffff disabled]
[    0.340922] pnp 00:02: >[io  0x0290-0x029f]
[    0.340925] pnp 00:02: >[io  0x0000-0xffffffffffffffff disabled]
[    0.340970] system 00:02: >[io  0x0290-0x029f] has been reserved
[    0.340977] system 00:02: >Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.341258] pnp 00:03: >[dma 4]
[    0.341261] pnp 00:03: >[io  0x0000-0x000f]
[    0.341264] pnp 00:03: >[io  0x0081-0x0083]
[    0.341266] pnp 00:03: >[io  0x0087]
[    0.341268] pnp 00:03: >[io  0x0089-0x008b]
[    0.341271] pnp 00:03: >[io  0x008f]
[    0.341273] pnp 00:03: >[io  0x00c0-0x00df]
[    0.341301] pnp 00:03: >Plug and Play ACPI device, IDs PNP0200 (active)
[    0.341314] pnp 00:04: >[io  0x0070-0x0071]
[    0.341324] pnp 00:04: >[irq 8]
[    0.341354] pnp 00:04: >Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.341364] pnp 00:05: >[io  0x0061]
[    0.341390] pnp 00:05: >Plug and Play ACPI device, IDs PNP0800 (active)
[    0.341418] pnp 00:06: >[io  0x0010-0x001f]
[    0.341421] pnp 00:06: >[io  0x0022-0x003f]
[    0.341423] pnp 00:06: >[io  0x0044-0x005f]
[    0.341426] pnp 00:06: >[io  0x0062-0x0063]
[    0.341428] pnp 00:06: >[io  0x0065-0x006f]
[    0.341431] pnp 00:06: >[io  0x0072-0x007f]
[    0.341433] pnp 00:06: >[io  0x0080]
[    0.341435] pnp 00:06: >[io  0x0084-0x0086]
[    0.341437] pnp 00:06: >[io  0x0088]
[    0.341440] pnp 00:06: >[io  0x008c-0x008e]
[    0.341442] pnp 00:06: >[io  0x0090-0x009f]
[    0.341445] pnp 00:06: >[io  0x00a2-0x00bf]
[    0.341447] pnp 00:06: >[io  0x00e0-0x00ef]
[    0.341449] pnp 00:06: >[io  0x04d0-0x04d1]
[    0.341499] system 00:06: >[io  0x04d0-0x04d1] has been reserved
[    0.341506] system 00:06: >Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.341517] pnp 00:07: >[io  0x00f0-0x00ff]
[    0.341524] pnp 00:07: >[irq 13]
[    0.341553] pnp 00:07: >Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.341768] pnp 00:08: >[io  0x03f8-0x03ff]
[    0.341774] pnp 00:08: >[irq 4]
[    0.341777] pnp 00:08: >[dma 0 disabled]
[    0.341855] pnp 00:08: >Plug and Play ACPI device, IDs PNP0501 (active)
[    0.341956] pnp 00:09: >[mem 0xfed40000-0xfed44fff]
[    0.341987] pnp 00:09: >Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.342179] pnp 00:0a: >[io  0x0400-0x0453]
[    0.342181] pnp 00:0a: >[io  0x0458-0x047f]
[    0.342184] pnp 00:0a: >[io  0x1180-0x119f]
[    0.342186] pnp 00:0a: >[io  0x0500-0x057f]
[    0.342189] pnp 00:0a: >[mem 0xfed1c000-0xfed1ffff]
[    0.342191] pnp 00:0a: >[mem 0xfec00000-0xfecfffff]
[    0.342194] pnp 00:0a: >[mem 0xfed08000-0xfed08fff]
[    0.342196] pnp 00:0a: >[mem 0xff000000-0xffffffff]
[    0.342245] system 00:0a: >[io  0x0400-0x0453] has been reserved
[    0.342252] system 00:0a: >[io  0x0458-0x047f] has been reserved
[    0.342258] system 00:0a: >[io  0x1180-0x119f] has been reserved
[    0.342263] system 00:0a: >[io  0x0500-0x057f] has been reserved
[    0.342270] system 00:0a: >[mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.342277] system 00:0a: >[mem 0xfec00000-0xfecfffff] could not be reserved
[    0.342283] system 00:0a: >[mem 0xfed08000-0xfed08fff] has been reserved
[    0.342289] system 00:0a: >[mem 0xff000000-0xffffffff] has been reserved
[    0.342296] system 00:0a: >Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.342340] pnp 00:0b: >[io  0x0454-0x0457]
[    0.342386] system 00:0b: >[io  0x0454-0x0457] has been reserved
[    0.342394] system 00:0b: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.342532] pnp 00:0c: >[mem 0xfed00000-0xfed003ff]
[    0.342578] pnp 00:0c: >Plug and Play ACPI device, IDs PNP0103 (active)
[    0.342771] pnp: PnP ACPI: found 13 devices
[    0.342776] ACPI: ACPI bus type pnp unregistered
[    0.342781] PnPBIOS: Disabled by ACPI PNP
[    0.379534] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[    0.379547] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
[    0.379570] pci 0000:00:1c.6: >PCI bridge to [bus 03-03]
[    0.379581] pci 0000:00:1c.6: >  bridge window [mem 0xfe500000-0xfe5fffff]
[    0.379598] pci 0000:00:1e.0: >PCI bridge to [bus 04-04]
[    0.379609] pci 0000:00:1e.0: >  bridge window [mem 0xfe400000-0xfe4fffff]
[    0.379669] pci 0000:00:1e.0: >setting latency timer to 64
[    0.379675] pci_bus 0000:00: >resource 4 [io  0x0000-0x03af]
[    0.379678] pci_bus 0000:00: >resource 5 [io  0x03e0-0x0cf7]
[    0.379680] pci_bus 0000:00: >resource 6 [io  0x03b0-0x03df]
[    0.379683] pci_bus 0000:00: >resource 7 [io  0x0d00-0xffff]
[    0.379686] pci_bus 0000:00: >resource 8 [mem 0x000a0000-0x000bffff]
[    0.379688] pci_bus 0000:00: >resource 9 [mem 0x000c0000-0x000dffff]
[    0.379691] pci_bus 0000:00: >resource 10 [mem 0xbfa00000-0xffffffff]
[    0.379695] pci_bus 0000:03: >resource 1 [mem 0xfe500000-0xfe5fffff]
[    0.379697] pci_bus 0000:04: >resource 1 [mem 0xfe400000-0xfe4fffff]
[    0.379700] pci_bus 0000:04: >resource 4 [io  0x0000-0x03af]
[    0.379703] pci_bus 0000:04: >resource 5 [io  0x03e0-0x0cf7]
[    0.379705] pci_bus 0000:04: >resource 6 [io  0x03b0-0x03df]
[    0.379708] pci_bus 0000:04: >resource 7 [io  0x0d00-0xffff]
[    0.379710] pci_bus 0000:04: >resource 8 [mem 0x000a0000-0x000bffff]
[    0.379713] pci_bus 0000:04: >resource 9 [mem 0x000c0000-0x000dffff]
[    0.379716] pci_bus 0000:04: >resource 10 [mem 0xbfa00000-0xffffffff]
[    0.379753] NET: Registered protocol family 2
[    0.379821] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.379942] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.380230] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.380363] TCP: Hash tables configured (established 131072 bind 65536)
[    0.380368] TCP: reno registered
[    0.380373] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.380382] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.380447] NET: Registered protocol family 1
[    0.380833] pci 0000:00:02.0: >BIOS left Intel GPU interrupts enabled; disabling
[    0.380863] pci 0000:00:02.0: >Boot video device
[    0.735007] PCI: CLS 64 bytes, default 64
[    0.735011] DMAR: Host address width 36
[    0.735016] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.735026] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.735032] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.735041] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.735047] DMAR: RMRR base: 0x000000bcba9000 end: 0x000000bcbb7fff
[    0.735052] DMAR: RMRR base: 0x000000bd800000 end: 0x000000bf9fffff
[    0.735900] audit: initializing netlink socket (disabled)
[    0.735913] type=2000 audit(1355177987.616:1): initialized
[    0.764147] highmem bounce pool size: 64 pages
[    0.764163] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.766775] VFS: Disk quotas dquot_6.5.2
[    0.766837] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.767462] fuse init (API version 7.19)
[    0.767565] msgmni has been set to 1547
[    0.767962] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.767997] io scheduler noop registered
[    0.768001] io scheduler deadline registered (default)
[    0.768011] io scheduler cfq registered
[    0.768147] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
[    0.768298] pcieport 0000:00:1c.0: >irq 41 for MSI/MSI-X
[    0.768477] pcieport 0000:00:1c.6: >irq 42 for MSI/MSI-X
[    0.768601] pcieport 0000:00:01.0: >Signaling PME through PCIe PME interrupt
[    0.768609] pcie_pme 0000:00:01.0:pcie01: >service driver pcie_pme loaded
[    0.768636] pcieport 0000:00:1c.0: >Signaling PME through PCIe PME interrupt
[    0.768646] pcie_pme 0000:00:1c.0:pcie01: >service driver pcie_pme loaded
[    0.768672] pcieport 0000:00:1c.6: >Signaling PME through PCIe PME interrupt
[    0.768677] pci 0000:03:00.0: >Signaling PME through PCIe PME interrupt
[    0.768686] pcie_pme 0000:00:1c.6:pcie01: >service driver pcie_pme loaded
[    0.768708] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.768736] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.768807] intel_idle: MWAIT substates: 0x1120
[    0.768809] intel_idle: v0.4 model 0x2A
[    0.768810] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.768904] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.768914] ACPI: Power Button [PWRB]
[    0.768964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.768971] ACPI: Power Button [PWRF]
[    0.769051] ACPI: Requesting acpi_cpufreq
[    0.987630] Freeing initrd memory: 14716k freed
[    0.995816] GHES: HEST is not enabled!
[    0.995851] isapnp: Scanning for PnP cards...
[    0.995921] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.016524] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.038409] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.059003] 0000:00:16.3: ttyS4 at I/O 0xf0e0 (irq = 17) is a 16550A
[    1.059238] Linux agpgart interface v0.103
[    1.060957] brd: module loaded
[    1.061817] loop: module loaded
[    1.061939] ahci 0000:00:1f.2: >version 3.0
[    1.062014] ahci 0000:00:1f.2: >irq 43 for MSI/MSI-X
[    1.074469] ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x33 impl SATA mode
[    1.074479] ahci 0000:00:1f.2: >flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst 
[    1.074490] ahci 0000:00:1f.2: >setting latency timer to 64
[    1.098949] scsi0 : ahci
[    1.099039] scsi1 : ahci
[    1.099110] scsi2 : ahci
[    1.099185] scsi3 : ahci
[    1.099253] scsi4 : ahci
[    1.099321] scsi5 : ahci
[    1.099500] ata1: SATA max UDMA/133 abar [email protected] port 0xfe625100 irq 43
[    1.099508] ata2: SATA max UDMA/133 abar [email protected] port 0xfe625180 irq 43
[    1.099514] ata3: DUMMY
[    1.099517] ata4: DUMMY
[    1.099522] ata5: SATA max UDMA/133 abar [email protected] port 0xfe625300 irq 43
[    1.099530] ata6: SATA max UDMA/133 abar [email protected] port 0xfe625380 irq 43
[    1.099619] pata_acpi 0000:00:16.2: >setting latency timer to 64
[    1.099688] ata_generic 0000:00:16.2: >setting latency timer to 64
[    1.099972] scsi6 : ata_generic
[    1.100036] scsi7 : ata_generic
[    1.100076] ata7: PATA max UDMA/100 cmd 0xf130 ctl 0xf120 bmdma 0xf0f0 irq 18
[    1.100082] ata8: PATA max UDMA/100 cmd 0xf110 ctl 0xf100 bmdma 0xf0f8 irq 18
[    1.100374] Fixed MDIO Bus: probed
[    1.100430] tun: Universal TUN/TAP device driver, 1.6
[    1.100434] tun: (C) 1999-2004 Max Krasnyansky 
[    1.100482] PPP generic driver version 2.4.2
[    1.100534] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.100573] ehci_hcd 0000:00:1a.0: >setting latency timer to 64
[    1.100578] ehci_hcd 0000:00:1a.0: >EHCI Host Controller
[    1.100587] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1
[    1.100621] ehci_hcd 0000:00:1a.0: >debug port 2
[    1.104518] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
[    1.104536] ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xfe627000
[    1.114387] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
[    1.114425] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[    1.114431] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.114437] usb usb1: >Product: EHCI Host Controller
[    1.114442] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    1.114447] usb usb1: >SerialNumber: 0000:00:1a.0
[    1.114584] hub 1-0:1.0: >USB hub found
[    1.114591] hub 1-0:1.0: >3 ports detected
[    1.114683] ehci_hcd 0000:00:1d.0: >setting latency timer to 64
[    1.114687] ehci_hcd 0000:00:1d.0: >EHCI Host Controller
[    1.114696] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
[    1.114729] ehci_hcd 0000:00:1d.0: >debug port 2
[    1.118627] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
[    1.118644] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xfe626000
[    1.130359] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
[    1.130392] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
[    1.130398] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.130405] usb usb2: >Product: EHCI Host Controller
[    1.130409] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[    1.130415] usb usb2: >SerialNumber: 0000:00:1d.0
[    1.130544] hub 2-0:1.0: >USB hub found
[    1.130551] hub 2-0:1.0: >3 ports detected
[    1.130621] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.130642] uhci_hcd: USB Universal Host Controller Interface driver
[    1.130692] xhci_hcd 0000:03:00.0: >xHCI Host Controller
[    1.130700] xhci_hcd 0000:03:00.0: >new USB bus registered, assigned bus number 3
[    1.130875] xhci_hcd 0000:03:00.0: >irq 18, io mem 0xfe500000
[    1.130959] xhci_hcd 0000:03:00.0: >irq 44 for MSI/MSI-X
[    1.130967] xhci_hcd 0000:03:00.0: >irq 45 for MSI/MSI-X
[    1.130975] xhci_hcd 0000:03:00.0: >irq 46 for MSI/MSI-X
[    1.130983] xhci_hcd 0000:03:00.0: >irq 47 for MSI/MSI-X
[    1.130991] xhci_hcd 0000:03:00.0: >irq 48 for MSI/MSI-X
[    1.130999] xhci_hcd 0000:03:00.0: >irq 49 for MSI/MSI-X
[    1.131006] xhci_hcd 0000:03:00.0: >irq 50 for MSI/MSI-X
[    1.131015] xhci_hcd 0000:03:00.0: >irq 51 for MSI/MSI-X
[    1.131180] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
[    1.131186] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.131193] usb usb3: >Product: xHCI Host Controller
[    1.131197] usb usb3: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
[    1.131203] usb usb3: >SerialNumber: 0000:03:00.0
[    1.131285] xHCI xhci_add_endpoint called for root hub
[    1.131286] xHCI xhci_check_bandwidth called for root hub
[    1.131312] hub 3-0:1.0: >USB hub found
[    1.131323] hub 3-0:1.0: >2 ports detected
[    1.131389] xhci_hcd 0000:03:00.0: >xHCI Host Controller
[    1.131396] xhci_hcd 0000:03:00.0: >new USB bus registered, assigned bus number 4
[    1.134295] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0003
[    1.134300] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.134307] usb usb4: >Product: xHCI Host Controller
[    1.134311] usb usb4: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
[    1.134338] usb usb4: >SerialNumber: 0000:03:00.0
[    1.134417] xHCI xhci_add_endpoint called for root hub
[    1.134419] xHCI xhci_check_bandwidth called for root hub
[    1.134445] hub 4-0:1.0: >USB hub found
[    1.134455] hub 4-0:1.0: >2 ports detected
[    1.349468] isapnp: No Plug & Play device found
[    1.350097] usbcore: registered new interface driver libusual
[    1.350153] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.352896] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.352906] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.353053] mousedev: PS/2 mouse device common for all mice
[    1.353205] rtc_cmos 00:04: >RTC can wake from S4
[    1.353375] rtc_cmos 00:04: >rtc core: registered rtc_cmos as rtc0
[    1.353414] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.353474] device-mapper: uevent: version 1.0.3
[    1.353550] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[    1.353589] EISA: Probing bus 0 at eisa.0
[    1.353594] EISA: Cannot allocate resource for mainboard
[    1.353598] Cannot allocate resource for EISA slot 1
[    1.353602] Cannot allocate resource for EISA slot 2
[    1.353606] Cannot allocate resource for EISA slot 3
[    1.353610] Cannot allocate resource for EISA slot 4
[    1.353614] Cannot allocate resource for EISA slot 5
[    1.353618] Cannot allocate resource for EISA slot 6
[    1.353622] Cannot allocate resource for EISA slot 7
[    1.353626] Cannot allocate resource for EISA slot 8
[    1.353630] EISA: Detected 0 cards.
[    1.353814] cpuidle: using governor ladder
[    1.354085] cpuidle: using governor menu
[    1.354090] EFI Variables Facility v0.08 2004-May-17
[    1.354341] ashmem: initialized
[    1.354494] TCP: cubic registered
[    1.354615] NET: Registered protocol family 10
[    1.354830] NET: Registered protocol family 17
[    1.354847] Key type dns_resolver registered
[    1.354913] Using IPI No-Shortcut mode
[    1.355095] PM: Hibernation image not present or could not be loaded.
[    1.355106] registered taskstats version 1
[    1.358473] Key type trusted registered
[    1.361461] Key type encrypted registered
[    1.364865]   Magic number: 8:394:350
[    1.364989] rtc_cmos 00:04: >setting system clock to 2012-12-10 22:19:48 UTC (1355177988)
[    1.366529] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.366532] EDD information not available.
[    1.417975] ata5: SATA link down (SStatus 0 SControl 300)
[    1.421965] ata6: SATA link down (SStatus 0 SControl 300)
[    1.425959] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.425993] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.427038] ata1.00: ATA-8: WDC WD5000AZRX-00A8LB0, 01.01A01, max UDMA/133
[    1.427048] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.428091] ata2.00: ATAPI: TSSTcorp CDDVDW SH-222BB, SB00, max UDMA/100
[    1.428187] ata1.00: configured for UDMA/133
[    1.428373] scsi 0:0:0:0: >Direct-Access     ATA      WDC WD5000AZRX-0 01.0 PQ: 0 ANSI: 5
[    1.428522] sd 0:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.428530] sd 0:0:0:0: >[sda] 4096-byte physical blocks
[    1.428559] sd 0:0:0:0: >Attached scsi generic sg0 type 0
[    1.428571] sd 0:0:0:0: >[sda] Write Protect is off
[    1.428575] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[    1.428584] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.428970] ata2.00: configured for UDMA/100
[    1.429924] usb 1-1: >new high-speed USB device number 2 using ehci_hcd
[    1.462986]  sda: sda1 sda2 < sda5 >
[    1.463428] sd 0:0:0:0: >[sda] Attached SCSI disk
[    1.469056] scsi 1:0:0:0: >CD-ROM            TSSTcorp CDDVDW SH-222BB  SB00 PQ: 0 ANSI: 5
[    1.472129] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.472139] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.472308] sr 1:0:0:0: >Attached scsi CD-ROM sr0
[    1.472383] sr 1:0:0:0: >Attached scsi generic sg1 type 5
[    1.562184] usb 1-1: >New USB device found, idVendor=8087, idProduct=0024
[    1.562194] usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.562615] hub 1-1:1.0: >USB hub found
[    1.562814] hub 1-1:1.0: >6 ports detected
[    1.637312] Freeing unused kernel memory: 756k freed
[    1.637472] Write protecting the kernel text: 5960k
[    1.637520] Write protecting the kernel read-only data: 2424k
[    1.637522] NX-protecting the kernel data: 4280k
[    1.649313] udevd[131]: starting version 175
[    1.666006] e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k
[    1.666013] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
[    1.666065] e1000e 0000:00:19.0: >setting latency timer to 64
[    1.666144] e1000e 0000:00:19.0: >Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.666201] e1000e 0000:00:19.0: >irq 52 for MSI/MSI-X
[    1.673555] usb 2-1: >new high-speed USB device number 2 using ehci_hcd
[    1.721552] firewire_ohci 0000:04:03.0: >added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[    1.733488] Refined TSC clocksource calibration: 2793.652 MHz.
[    1.733498] Switching to clocksource tsc
[    1.805661] usb 2-1: >New USB device found, idVendor=8087, idProduct=0024
[    1.805670] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.805938] hub 2-1:1.0: >USB hub found
[    1.806025] hub 2-1:1.0: >8 ports detected
[    1.862882] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    1.862886] EXT4-fs (sda1): write access will be enabled during recovery
[    1.867113] e1000e 0000:00:19.0: >eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:99:5f:ed
[    1.867117] e1000e 0000:00:19.0: >eth0: Intel(R) PRO/1000 Network Connection
[    1.867165] e1000e 0000:00:19.0: >eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    1.877340] usb 1-1.2: >new low-speed USB device number 3 using ehci_hcd
[    1.977405] usb 1-1.2: >New USB device found, idVendor=04f2, idProduct=0116
[    1.977421] usb 1-1.2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.977429] usb 1-1.2: >Product: USB Keyboard
[    1.977433] usb 1-1.2: >Manufacturer: CHICONY
[    1.983847] usbcore: registered new interface driver usbhid
[    1.983850] usbhid: USB HID core driver
[    1.985105] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
[    1.985230] hid-generic 0003:04F2:0116.0001: >input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1a.0-1.2/input0
[    2.049056] usb 1-1.5: >new low-speed USB device number 4 using ehci_hcd
[    2.150647] usb 1-1.5: >New USB device found, idVendor=045e, idProduct=0084
[    2.150657] usb 1-1.5: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.150664] usb 1-1.5: >Product: Microsoft Basic Optical Mouse
[    2.150669] usb 1-1.5: >Manufacturer: Microsoft
[    2.155404] input: Microsoft Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input3
[    2.155559] hid-generic 0003:045E:0084.0002: >input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-1.5/input0
[    2.220866] firewire_core 0000:04:03.0: created device fw0: GUID 00224dffff86451d, S400
[    2.554354] EXT4-fs (sda1): recovery complete
[    2.566100] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.172128] Adding 8300540k swap on /dev/sda5.  Priority:-1 extents:1 across:8300540k 
[    4.896123] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.374135] udevd[365]: starting version 175
[    5.997178] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
[    6.007622] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
[    6.008556] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
[    6.009475] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
[    6.010307] microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x28
[    6.011202] microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x28
[    6.012050] microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x28
[    6.012966] microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x28
[    6.013834] microcode: Microcode Update Driver: v2.00 , Peter Oruba
[    6.024762] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \_SB_.PCI0.GFX0.TCOI 1 (20120320/utaddress-251)
[    6.024767] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.024769] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[    6.026229] tpm_tis 00:09: >1.2 TPM (device-id 0xFE, rev-id 70)
[    6.035301] gpio_ich: GPIO from 180 to 255 on gpio_ich
[    6.056597] mei 0000:00:16.0: >setting latency timer to 64
[    6.056670] mei 0000:00:16.0: >irq 53 for MSI/MSI-X
[    6.065788] lp: driver loaded but no devices found
[    6.206758] [drm] Initialized drm 1.1.0 20060810
[    6.228049] i915 0000:00:02.0: >setting latency timer to 64
[    6.228269] pci 0000:00:00.0: >Intel Sandybridge Chipset
[    6.228300] pci 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
[    6.229464] pci 0000:00:00.0: >detected 32768K stolen memory
[    6.229688] i915 0000:00:02.0: >irq 54 for MSI/MSI-X
[    6.229697] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.229698] [drm] Driver supports precise vblank timestamp query.
[    6.229726] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.328603] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[    6.827132] fbcon: inteldrmfb (fb0) is primary device
[    6.996883] Console: switching to colour frame buffer device 210x65
[    7.000159] fb0: inteldrmfb frame buffer device
[    7.000160] drm: registered panic notifier
[    7.000170] i915: No ACPI video bus found
[    7.000191] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    7.000329] snd_hda_intel 0000:00:1b.0: >irq 55 for MSI/MSI-X
[    7.632858] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[    7.632944] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    7.633020] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    7.633096] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    7.633171] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    7.633246] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    9.497060] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    9.998649] init: failsafe main process (732) killed by TERM signal
[   11.457998] ppdev: user-space parallel port driver
[   11.971470] type=1400 audit(1355177999.119:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=842 comm="apparmor_parser"
[   11.971757] type=1400 audit(1355177999.119:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=842 comm="apparmor_parser"
[   12.042435] Bluetooth: Core ver 2.16
[   12.042446] NET: Registered protocol family 31
[   12.042447] Bluetooth: HCI device and connection manager initialized
[   12.042448] Bluetooth: HCI socket layer initialized
[   12.042449] Bluetooth: L2CAP socket layer initialized
[   12.042452] Bluetooth: SCO socket layer initialized
[   12.100579] type=1400 audit(1355177999.247:4): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=884 comm="apparmor_parser"
[   12.100963] type=1400 audit(1355177999.247:5): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=884 comm="apparmor_parser"
[   12.136961] type=1400 audit(1355177999.283:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=879 comm="apparmor_parser"
[   12.137114] type=1400 audit(1355177999.283:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=877 comm="apparmor_parser"
[   12.137180] type=1400 audit(1355177999.283:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=878 comm="apparmor_parser"
[   12.137216] type=1400 audit(1355177999.283:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=879 comm="apparmor_parser"
[   12.137345] type=1400 audit(1355177999.283:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=877 comm="apparmor_parser"
[   12.137411] type=1400 audit(1355177999.283:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=878 comm="apparmor_parser"
[   12.208450] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   12.208453] Bluetooth: BNEP filters: protocol multicast
[   12.209470] Bluetooth: RFCOMM TTY layer initialized
[   12.209473] Bluetooth: RFCOMM socket layer initialized
[   12.209475] Bluetooth: RFCOMM ver 1.11
[   13.713673] init: lightdm main process (952) killed by TERM signal
[   14.908649] e1000e 0000:00:19.0: >irq 52 for MSI/MSI-X
[   15.009775] e1000e 0000:00:19.0: >irq 52 for MSI/MSI-X
[   15.010055] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.010269] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.098699] init: plymouth-stop pre-start process (1205) terminated with status 1
[   19.166081] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[   19.166183] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready